Detailed below is Tesuco's range of regulator accessories
including outlet adaptors and gauge protectors.
There are applications that require a 90 degree adaptor on the
outlet of the regulator. These ones are small and made from solid
brass for left hand and right hand threads.
| Product Code | Description | Price |
| G-AD90LH58 |
Right Angled Outlet Adaptor Inlet 5/8-18UNF LH Female Outlet 5/8-18UNF LH Male
| Login |
| G-AD90RH58 |
Right Angled Outlet Adaptor Inlet 5/8-18UNF RH Female Outlet 5/8-18UNF RH Male
| Login |
Gauge protectors are available to fit to the 50mm diameter
pressure gauges. They help protect the pressure gauge from minor
knocks and impacts when in use and being transported.
| Product Code | Description | Price |
| SPRGPB |
Gauge Protector 50mm Black Rubber
| Login |
| SPRGPBL |
Gauge Protector 50mm Blue Rubber
| Login |
| SPRGPR |
Gauge Protector 50mm Red Rubber
| Login |
Gauge Protector Display Pack
|
Gallery
|
| Product Code | Description | Price |
| SPRGPBD |
Gauge Protector 50mm Black Rubber Twin Display Pack
| Login |
| SPRGPBLD |
Gauge Protector 50mm Blue Rubber Twin Display Pack
| Login |
| SPRGPRD |
Gauge Protector 50mm Red Rubber Twin Display Pack
| Login |
When not in use, it is good practice to have blanking plugs on
the outlets of regulators and regulated outlet points. This stops
the ingress of dirt and insects and stops gas leaks if they are
accidentally turned on. They also protect the thread from damage
during transport.
| Product Code | Description | Price |
| W-PLUG58LH |
Blanking Plug L/H 5/8 Complete
| Login |
| W-PLUG58RH |
Blanking Plug R/H 5/8 Complete
| Login |
The heaters are suitable for pressures up to 200 bar (20,000
kPa). The media flowing through the system are evenly warmed
through an automatic temperature control, so that an uninterrupted
flow - even when in constant use - is provided. There are two
mounting options available. One has type 30 connections and can be
mounted between the cylinder and the regulator, or on a wall
mounted manifold arrangement, between the manifold and regulator.
Gas warmers should be situated under cover as the units are weather
proof but not waterproof. It is recommended that the power is
disconnected when the system is out of use for long periods as the
gas heater can overheat the gas. When the system is not being used
the cylinder valve should be shut and the gas pressure released
from the system.
| Product Code | Description | Price |
| GH19030 |
Gas Heater for Welding Gas, Type 30 Nut & Stem Inlet / T30 Male Outlet
| Login |