Detailed below is Tesuco's range of replacement hose fittings,
hose joiners and clips.
The crimping tool is specifically
designed for use with the GWC5 clips to secure the hose barb once
inserted into the ends of the hose. The tool is robust and easy to
use and makes this a very simple fixing method.
| Product Code | Description | Price |
| A2100 |
Crimping Tool
| Login |
This hose clip is designed for use
with 5 mm hose nut and tail. They are available as a spare part for
hose repairs.
| Product Code | Description | Price |
| GWC10 |
Clip 10mm ID Hose
| Login |
| GWC5 |
Clip 5mm ID Hose
| Login |
| GWC5D |
Clip 5mm ID Hose (Pack of 10)
| Login |
These male threaded hose joiners are
designed for the temporary joining of two hose sets when longer
lengths are required. They are available in left and right hand for
oxygen and fuel gas hoses.
| Product Code | Description | Price |
| GWHC34 |
Hose Joiner
Type WB34 Right Hand
| Login |
| GWHC35 |
Hose Joiner
Type WB35 Left Hand
| Login |
Hose Nut and Tail with Clip 5 mm
|
Gallery
|
This type of nut and hose tail
assembly is designed to be fitted into 5 mm hose, then secured with
a clip using the special tool. They are available in left and right
hand for oxygen and fuel gas hoses.
| Product Code | Description | Price |
| GWHCF |
Nut LH 5/8-18UNF
Hose Tail and Clip - 5mm
| Login |
| GWHCI |
Nut RH 5/8-18UNF
Hose Tail and Clip - 5mm
| Login |
| GWHCIC |
Nut RH 5/8-18UNF
Hose Tail - 5mm
Chrome-Plated
| Login |
| GWHCIF |
Nut R/H 1/4" SAE Flare
5mm Hose Tail
| Login |
Hose Nut and Tail with Clip 10 mm
|
Gallery
|
This type of nut and hose tail assembly is designed to be fitted
into 10 mm hose, then secured with a clip using the special tool.
They are available in left and right hand for oxygen and fuel gas
hoses.
| Product Code | Description | Price |
| GWHCF10 |
Nut LH 5/8-18UNF
Hose Tail and Clip - 10mm
| Login |
| GWHCI10 |
Nut RH 5/8-18UNF
Hose Tail and Clip - 10mm
| Login |
Hose Connections / Hose Joiners 5 mm
|
Gallery
|
This range of hose connection and
joiner use a shroud and hose tail that screw into the 5 mm hose
forming a very secure end fitting. A special tool should be used to
fit them correctly. The connections are available in left and right
hand for oxygen and fuel gas hoses. The joiner is suitable for
either hose when a repair is required in the length of the
hose.
| Product Code | Description | Price |
| GWLP112RH |
Hose Connection Brass
5/8-18 UNF RH / 5mm Hose
Type LP112
| Login |
| GWLP240LH |
Hose Connection Brass
5/8-18 UNF LH / 5mm Hose
Type LP240
| Login |
| GWLP265 |
Hose Joiner Brass
Type LP265
| Login |